Lionel Service News

To reset sounds on Legacy locomotives.



When you have a Legacy locomotive that has no sounds or is missing certain sounds this may be due the sounds being turned down with your command system. The fix is quite easy.

 First check that the volume pot is turned up, then call up the unit(s) in the command environment. Press sound up several times, #1 on the controller if the icon is not there or if you are using Cab1. If this does not bring up the sounds hit AUX1, then sound up several times. Next press AUX1, then short horn blast, then sound up.

This should clear it.

I call this the Sound Up Trifecta.