LEGACY™ Control System Registration

Return a Legacy Control System

Step 1:

Place the Cab-2 remote in the Legacy Base cradle.

Step 2:

Wrap the base/remote combo in bubble wrap to protect it

Step 3:

This is how the base/remote should look once you have wrapped it in the bubble wrap.

Step 4:

Place Styrofoam shipping peanuts in the bottom of a 12" x 6" x 6" box or larger

Step 5:

Place the bubble wrapped base and remote in the box on top of the peanuts.

Step 6:

Insert either foam or Styrofoam or similar material on both ends of the base to protect it during shipment.

Step 7:

Place Styrofoam peanuts on the top of the wrapped base/remote.

Step 8:

Seal the box with packing tape.

Step 9:

With a magic marker write your RA number in large characters on the outside of the box.

Once you have completed Step 9, please check to make sure your base/remote does not rattle or move inside the box when shaken! If it does rattle or move, please add more foam and/or packing peanuts until it no longer rattles or moves.

Ship your box to:

Lionel LLC
6000 Victory Lane
Concord, NC 28027

Your RA number will be how your base/remote is tracked while being upgraded, it is imperative you save this information and write it clearly on the outside of the box!